Run more cans.
serve more customers.
with the Trash Cat 47-14 roll-off dumpster hoist
Trash Cat 47-14: the solution to your 47” truck and trailer difficulties.
The Trash Cat 47-14 was created to unlock your capacity to serve your customers and earn the trust your business deserves.
Spend your time hauling cans, not waiting on your equipment to keep up. The Trash Cat has significantly faster cycle times, 8-ton lift capacity, and a 15k hydraulic winch.
A hoist designed to outlast multiple truck chassis, the Trash Cat is built to haul your heaviest loads.
Both the TC47-14 Hydraulic and TC47-14 Electric are compatible with U-Dump and Texas Pride dumpsters.
the trailer got you here. now for the next step.
Wireless controls, an adjustable mast with auto tarp system, and back-of-cab controls means you’re hauling more loads each day.
you want to haul cans,
not wait on equipment.
15-30 cans. This is where we see most operators successfully make the jump from their truck and trailer into a dedicated truck setup. This has allowed them to add an average of 3-5 extra runs per day, depending on distance.
Trash Cat 47-14 Specifications
| Spec | Hydraulic | Electric |
|---|---|---|
| Rail Width | 47" – fits Texas Pride & U-Dump | 47" – fits Texas Pride & U-Dump |
| Dumpster Lengths | 12' & 14' | 12' & 14' |
| Lift Mechanism | 16k scissor lift | 16k scissor lift |
| Winch | Warn 15k Hydraulic | Warn 15k Hydraulic (electric driven) |
| Hydraulic Pump | PTO wet line (not included) | 2gpm @ 3000psi (included) |
| PTO Requirement | 12gpm @ 3000psi | None |
| Controls | Switch panel behind cab | Switch panel behind cab |
| Control Valve | Solenoid-operated, pre-installed | N/A |
| Master Disconnect | N/A | Included |
| Tilt Frame | 6 x 2 x 1/4" steel | 6 x 2 x 1/4" steel |
| Subframe | 4 x 3 x 3/16" steel | 4 x 3 x 3/16" steel |
| Dump Angle | 45˚ minimum | 45˚ minimum |
| Lift Capacity | 16,000 lbs | 16,000 lbs |
What People Are Saying
-
After I bought this truck, I was able to buy more cans and keep them rotating, generating more revenue.
— Former Customer
-
You guys were great to work with. You made that really, really easy on our end.
— Former Customer
-
With 5-7 stops in a day, the trailer became really tough. Once we got the truck, we could turn these cans a lot faster.
— Former Customer
Also works with
Freightliner M2
Ford F650 & F750
Mack MD6 & MD7
Peterbilt 535 & 536
Kenworth T180 & T280
International CV & MV Series
Hino L-Series
Isuzu N-Series
We Build It
Option 1:
Buy a turn-key truck built by us
Starting at
$90,000*
Option 2:
Bring us your truck and we upfit it
Starting at
$50,000*
How to Buy
You Build It
We ship you a DIY kit, and you partner with an upfitter near you or install it yourself.
HOW IT WORKS
We advise you on truck selection
We ship you a kit
DIY install or partner with a local upfitter
Haul trash!
starting at
$45,000*
*budget options available
You’ll talk to someone who actually built this.
Call Zach.
One conversation covers everything — which truck fits your operation, financing, and how to get it to you. No runaround, no guessing.
Get a straight answer on which truck, which configuration, and which path is right for your operation
Sort financing with our guy who knows these trucks
Pick up or we ship it – your call
Hoist Spec Deep Dive
Works with Your Truck
| Spec | Requirement | |
|---|---|---|
| Cab to Axle | 120" minimum | |
| Cab to End of Frame | 167" – 171" | |
| Frame Height | 30"-37" | |
| Frame Width | 34.5" maximum | |
| Spring Hanger to End of Frame | 6" minimum |
Compatible: Ford F-550, Ford F-600, F-650, Ram 5500, Chevy 5500/6500, and most 26,000lb GVWR trucks
Works with Your Cans
| Spec | Ability | |
|---|---|---|
| Rail Width | 47" – fits Texas Pride & U-Dump Systems | |
| Dumpster Lengths | 12' and 14' | |
| Lift Capacity | 16,000 lbs | |
| Dump Angle | 45˚ minimum |
Note on 16’ Dumpsters: A 16’ can is physically possible but not recommended on a 120” cab-to-axle hoist. If you’re running 16’ cans, talk to us before you order.
Load Distribution
Where your load sits relative to the axle matters for how your truck handles and what your registration allows. Here’s what we’ve measured:
| Spec | Forward of Axle | Rear of Axle | Cargo Center of Gravity |
|---|---|---|---|
| 12' | 83" (58%) | 61" (42%) | 11" forward of axle |
| 14' | 83" (49%) | 85" (51%) | 1" rear of axle |
How it’s Built
| Spec | Value | |
|---|---|---|
| Tilt Frame | 6 x 2 x 1/4" steel | |
| Subframe | 4 x 3 x 3/16" steel | |
| Rail Rollers | Internal, greasable, welded in place | |
| Winch | Warn 15k (electric or hydraulic) | |
| Tail Lights | DOT combination stop/tail/turn/reverse | |
| Ground Roller | Included | |
| DOT Bumper | Included |
Hydraulic Vs. Electric
| Spec | Hydraulic | Electric |
|---|---|---|
| Lift Mechanism | Scissor | Scissor |
| Winch | Warn 15k Hydraulic | Warn 15k Hydraulic (electrically driven) |
| Hydraulic Pump | PTO wet line (not included) | 2gpm @3000psi (included) |
| PTO Requirement | 12gpm @3000psi | None |
| Controls | Wireless & Switch panel behind cab | Wireless & Switch panel behind cab |
| Master Disconnect | N/A | Included |
| Control Valve | Solenoid-operated, pre-installed | N/A |
What Ships Pre-Installed
All controls, hydraulics, and electrical components arrive on the hoist ready to connect.
Electric version requires battery hookup and light harness connection only.
Hydraulic version requires PTO, pump, and supply/return lines — control valve ships pre-installed.
Shipping Dimensions
| Spec | L | W | H | Weight |
|---|---|---|---|---|
| Hoist Only | 219" | 68" | 30" | 2,500 lbs |
| With Tarp Mast | 219" | 68" | 30" | 2,700 lbs |
Mounting Hardware
Mounting Kit included (weld-on tabs, frame spacer shims, and 1/2” Grade 8 bolts).
Weld tabs to hoist subframe, bolt to truck frame.